Eltek Valere Theia He-t Guía de instalación descargar pdf (Pagina 10)

10 Installation Guide THEIA HE-t String Inverters 357115.033, Issue 2.0, 2011 March

2.2.1. Wall Bracket

Depending on the mounting surface, different mounting methods may be required to secure

the wall bracket. The system installer is responsible for selecting the correct type and number

of fixings suitable to support the weight on the mounting surface. The bracket is designed to

withstand 80 kg / 176.4 lbs.

Carrier slots for the

inverter

Steering slots for the

inverter

Carrier slots for the

stringbox

Fixing clip

D1.

232.5 mm/9.2 inches

D2.

232.5 mm/9.2 inches

D3.

75 mm/2.95 inches

D4.

75 mm/2.95 inches

Figure 2.2.2: Inverter bracket Figure 2.2.3: Distances between fixing screws

• The inverter must be mounted in a vertical position.

• Mark the mounting holes on the mounting surface using the bracket as a template and a

spirit level.

• Fasten the bracket to the mounting surface with the required number of fixings to support

the required hanging weight of the inverter.

2.2.2. Inverter

Attach the inverter to the mounting bracket as follows:

• Locate the hooks for the carrier slots on the upper back and the hooks for the steering slots

on the lower back of the inverter.

• With string box included: Use the locating pins taps on the box.

Figure 2.2.4: Hooks on the back of the inverter

Figure 2.2.5: Inverter onto bracket

• Lift the inverter up and guide the upper hooks into the slots on the bracket.

• Control the lower hooks into the slots and slide the inverter onto the bracket.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 35 36

Sin comentarios

Eltek Valere Theia He-t Guía de instalación Pagina 10