Eltek Valere Theia He-t Guía de instalación descargar pdf (Pagina 6)

6 Installation Guide THEIA HE-t String Inverters 357115.033, Issue 2.0, 2011 March

1.3.2. Unpacking

Unpack the inverter as follows:

• Place the box in position, with the top clearly visible and according to the arrow marking on

the packaging.

• Cut the seal, and open the box.

• Remove the upper part of the foam packing material.

• Take out the Installation Guide and the envelope with the extra product label.

• Both sides of the inverter case are narrowed in order to get a

better grip on the inverter. Lift up the inverter carefully out of

the box using the “handles” illustrated in Figure 1.3.2.

• Remove the lower section of the foam packaging and take out

the inverter mounting bracket.

• The bag with accessories is attached to the bracket.

• Store all the original packing material for possible later use.

After unpacking the inverter safely, check that all components

are present and in an undamaged condition.

Figure 1.3.2: “Handles”

1.3.3. Scope of Delivery

• THEIA HE-t single phase inverter

• Mounting bracket

• Installation Guide

• Accessories: grounding strap, bracket screws, lock clip, extra product label

NOTICE

The mating parts of the connectors are not part of the standard scope of supply, and must be

provided by the system installer.

1.3.4. Inverter Structure

The housing of the THEIA HE-t inverter is designed to:

• IP 65/NEMA 4X for indoor or outdoor use.

• Provide a degree of protection from dirt, rain, sleet, snow, dust, water, and corrosion.

• Be undamaged by the external formation of ice on the housing.

The inverter has the following dimensions:

Figure 1.3.3: Mechanical dimensions

H: 610 mm / 24.0 inches

W: 353 mm / 13.9 inches

D: 158 mm / 6.2 inches

1 2 3 4 5 6 7 8 9 10 11 ... 35 36

Sin comentarios

Eltek Valere Theia He-t Guía de instalación Pagina 6