Eltek Valere Theia He-t Guía de instalación descargar pdf (Pagina 4)

4 Installation Guide THEIA HE-t String Inverters 357115.033, Issue 2.0, 2011 March

1. Product Overview

This Installation Guide contains all the necessary install information to connect and start up

the THEIA HE-t inverter. The inverter must be used in compliance with the THEIA HE-t User

Guide, which is to be found at www.eltekvalere.com.

1.1. Symbols Used

The warning symbols used in this Installation Guide highlight important information on

how to avoid hazards to persons and equipment.

DANGER:

Describes a hazard that poses an imminent risk of serious injury or death

WARNING:

Describes a hazard that could result in serious injury or death, or could render

equipment permanently inoperative

CAUTION:

Describes a hazard that could result in personal injury or cause equipment

damage

NOTICE:

Describes a policy or standard that should be understood and followed

This symbol indicates that there is a potential for electric shock or

electrocution

This symbol indicates an important safety note

Pay particular attention when the symbols appear in this Installation Guide!

1.2. Product Label

The product label is attached to the lower right side of the inverter housing. It contains

important identification parameters and characteristics for the inverter, and must be clearly

visible after installation.

Figure 1.2.1: Product Label

1 2 3 4 5 6 7 8 9 ... 35 36

Sin comentarios

Eltek Valere Theia He-t Guía de instalación Pagina 4