Eltek Valere Theia He-t Guía de instalación descargar pdf (Pagina 8)

8 Installation Guide THEIA HE-t String Inverters 357115.033, Issue 2.0, 2011 March

2. Installation

Installation of the THEIA HE-t inverter shall be performed by qualified installers only, who

have knowledge about the local and national electrical regulations in force.

DANGER: Only qualified persons may install the inverter!

Only persons who are qualified to install high voltage electrical equipment and are

familiar with the electrical regulations applicable to the installation site may install

the inverter. This is to ensure a safe installation and avoid electrocution!

Refer to User Guide for more detailed information about safety precautions

regarding mechanical and electrical installation.

• The THEIA HE-t is a utility-interactive (grid-tie) inverter and must be used exclusively for

its designed purpose, which is to convert PV-generated DC electricity into AC electricity to

feed into the electricity network.

DANGER: Ensure correct installation and operation of the inverter!

The safety precautions and instructions in this Installation Guide must be read

thoroughly to be able to install and operate the inverter properly to prevent death,

injury or material damage.

2.1. Checks Prior to Installation



Make sure that the AC circuit breaker(s) and the DC switch(es) are OFF and that the

terminals are in a discharged state to prevent shock hazards.

DANGER: Contact with elive wires may cause lethal injuries!

All work on the inverter must be performed with disconnected terminals to avoid

shock hazards!



All electrical installations shall comply with the local and national electrical regulations

in force in the country of installation.



Check that the PV and the grid characteristics are compatible with the inverter

characteristics (See 4. Technical Data).

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 35 36

Sin comentarios

Eltek Valere Theia He-t Guía de instalación Pagina 8