Eltek Valere UNV-F 2.5 Manual de usuario descargar pdf (Pagina 12)

100

DC Controller

UPC4 Master

User Manual

Page 12/100

3.2.2 Modem connector/Fieldbus connector/SD card slot/LED indications

Figure 3. Modem connector/Fieldbus connector/SD card slot/LED indications

3.2.2.1 SD card slot

REMARK: This functionality is not available at version 2.12.

The SD card slot is designed for future extensions.

3.2.2.2 Push buttons 1 & 2

Push button 1

Pressing push button 1 causes release of the SD card (wh

en the SD functionality is supported in the

future).

Push button 2 (→ is designed for future use).

3.2.2.3 LED indication

LED 1 to LED 5 (see figure 3.) indicates the status of the UPC4 Master according to the table below.

LED Colour Indication of:

1 green Operation status OK

2 red ALARM

3 green CAN communication (LED is

flickering)

4 orange Field bus active (LED is flickering)

5 green SD card active

During power up procedure of the UPC4

unit the status of LED 1 & 2 is the

following:

During booting procedure the red LED is

ON. After finishing power up the red LED

“ALARM” is OFF; the green LED “Operation

status OK” is ON.

Dip switches

SD card slot

Female connector RS485

(Mod-/Profibus)

Hex switch 1

Hex switch 2

ON OFF

Male connector

RS232 (Modem)

Push button 1

Push button 2

LED 1 (green)

LED 2 (red)

LED 3 (green)

LED 4 (orange)

LED 5 (green)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 99 100

Comentarios a estos manuales

Sin comentarios

Eltek Valere UNV-F 2.5 Manual de usuario Pagina 12

Comentarios a estos manuales

Relacionado con productos y manuales para Adaptadores E Inversores De Energía Eltek Valere UNV-F 2.5