search

Eltek Valere UNV-F 2.5 Manual de usuario Pagina 46

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 100
  • Tabla de contenidos
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 45
DC Controller
UPC4 Master
User Manual
Page 46/100
©2010. ELTEK VALERE DEUTSCHLAND GmbH. UM_UPC4_V2.00_E_R1.1_2011-01-04
Parameters which effect that other areas are hidden/unhidden are marked green.
Those parameters which can be hidden due to this are marked bl
ue (see the following picture please).
The concerned parameters are represented in this manual by a number followed by a superscripted "N"
or a star (*) and a s
uperscripted number in addition.
Example 1:
"1.10)
*1.6
": That means that the parameter 1.6 must be enabled in order to make parameter
1.10 visible (see 6.4 "Basic setting UPC4"
).
Example 2:
(2.18)
N*2.19
: That means that the parameter 2.19 must not be enabled in order to make
parameter 2.18 visible (see section 6.4.2 „CAN Devices Cnt
“).
6.2 Table “Overview of the configuration items”
The configuration items are divided in several groups for clarity as shown in the table as follows:
Basic settings of the UPC4 (section 6.4)
UPC4 (section 6.4.1) Serial number, firmware version, configuration date/person, IP, time server,
language selection
CAN devices Cnt (section 6.4.2) Number of the CAN bus connected modules such as rectifiers, analog
measurement inputs (UMD2), fan racks etc.
Charge control (section 6.4.3) Settings of the battery charge controller
Service/Enable (section 6.4.4) Enabling of services, e.g. battery test, boost charge, equalize charge, system
test, insulation measurement, SNMP, ModBus, etc.
Syst parameters (section 6.4.5) Default values (voltage/current) of the rectifier modules
Battery (section 6.4.6)
Battery values, battery fuses, asymmetric measurement, temperature
compensation
Measurement system (section 6.5)
Assignment Measu (section 6.5.1) Affords the assignment of measuring channels to measuring objects
Assignment Shunt* (section 6.5.2) Assignment of shunt values to current measuring inputs (*BU is required)
Tresholds (section 6.6)
Thresholds (section 6.6.1) Threshold values of: battery over/under voltage, over/under temperature,
battery operation
Thres. Gen. par (section 6.6.2) Threshold values of general parameters e.g. UMD2 analog measuring inputs
Outputs/Alarm signaling (section 6.7)
Vista de pagina 45
1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 99 100

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Adaptadores E Inversores De Energía Eltek Valere UNV-F 2.5
Adaptadores E Inversores De Energía Eltek Valere Theia He-t Guía de instalación     (192 paginas)
Adaptadores E Inversores De Energía Eltek Valere Theia He-t Manual de usuario   (78 paginas)
Adaptadores E Inversores De Energía Eltek Valere UNV-F 2.5 Manual de usuario   (28 paginas)
Adaptadores E Inversores De Energía Eltek Valere UNV-F 2.5 Manual de usuario   (80 paginas)
  • APELSON Fountain Cellar Diamondback-fitness Rogerblack Eden Brand
  • Swan Hierros Miele Artículos Sanitarios Frigidaire Batidoras Hoshizaki No Epson Accesorios Para Bicicletas
  • Securitron MK_Series Faber Agio HP Pavilion 32 QHD 32-inch Display Philips MCM1350/12 Nokia 6235
  • Samsung SAMSUNG PL55 Manual de usuario Liebherr CUN 3933 Comfort NoFrost Manual de usuario Acer S230HL Manual de usuario Worcester DANESMOOR Instrucciones de operaciones LG DR676X Manual de usuario