Eltek Valere UNV-F 2.5 Manual de usuario descargar pdf (Pagina 72)

100

DC Controller

UPC4 Master

User Manual

Page 72/100

2(1).system(1).sysDescr(1) is answered with „UPC4 Application“. But if a text is typed in, this text is

used.

The password for SNMP read authorisation has to be set at (2

9.2)

*9.7

, the password for SNMP write

authorisation has to be set at (29.3)

*9.7

. Up to ten trap receivers (29.4)

*9.7

can be configured. All IPs

unequal to "0.0.0.0" are used.

6.10.6 Modem*

(* requires 9.6), see section 6.4.4.

For remote control th

e UPC4 can be

extended by an external modem. It is

operated via serial interface.

Modem operation can be enabled at

"Service/Enable

If no connection exits, the external modem is initialized according to the “Init repeat time” as set at

parameter (

30.1)

*9.6

. For that the initial string (30.2 & 30.3)

*9.6

is used.

Modem password (30.4)

*9.6

is required to make a dial-up from an external modem to the UPC4.

Initial string:

The initial string consists of (30.2)

*9.6

& (30.3)

*9.6

. If the field (30.2)

*9.6

is too small, the initial string can

be continued in the field (30.3)

*9.6

AT AT%O AT&F %dATX3E0L1S0=0

This is set in the configuration of the UPC4. This instruction set is executed from the left to the right

nd transferred to the modem. Specific features are the tokens “%” (e.g. %O, %d). Those are not

transferred but are commands which are executed via the UPC4.

Either a blank or the end of the string effects the transfer of a CR LF (ENTER KEY at PC).

The Initial.string (see above) works nearly with all standard modems and should be changed only in

exceptio

nal cases. For the AT commands which are understood from your modem please see the

attendant manual.

IMPORTANT:

The modem must not answer self acting (ATS0=0), otherwise pass word

polling is avoided.



30.1

30.2

30.3

30.4

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 99 100

Comentarios a estos manuales

Sin comentarios

Eltek Valere UNV-F 2.5 Manual de usuario Pagina 72

Comentarios a estos manuales

Relacionado con productos y manuales para Adaptadores E Inversores De Energía Eltek Valere UNV-F 2.5