Eltek Valere UNV-F 2.5 Manual de usuario descargar pdf (Pagina 68)

100

DC Controller

UPC4 Master

User Manual

Page 68/100

For RDP only:

On the R

emote Display Panel definite block

diagrams are used. For detailed

information please see the specific user

manual of the RDP.

By parameter "Enable RDP" (23.1) the RDP

can be enabled.

At "StartUP action" (

23.2)

*23.1

it is set how

the UPC4 system should act after a

restart.

„0 = none“ >> no command to the CAN devices. The present condition “ON” respectively “OFF” persists.

“1 = CAN devices ON“ >> CAN devices explicit

ly get the ON command.

“2 = CAN devices OFF“ >> CAN devices explicitly get the OFF command.

Parameter (

23.3)

*23.1

and (23.4)

*23.1

enables the CAN modules and digital inputs as well which should

be used on the RDP.

For more information about the RDP configuration please read the RDP user manual.

6.10 Additional functions

6.10.1 Battery Test*

(*requires 7.1), see section 6.4.4.

Battery Test can be started by several

options,

please see section 6.4.4

Service/Enable

For an automatic battery test date and

time (26.4)

*7.1

are to be set.

Via parameter (26.5)

*7.1

the battery test

can regularly be repeated according to the

set interval (day(s)).

A running battery test either can be stopped manually or automatically by exceeding a break-off

criterion.

The automatic break-off criteria “Max DischargeCap“ (26.1)

*7.1

(e.g. 80% of the battery capacity is

discharged) and “Max Test-durat.“ (26.2)

*7.1

(e.g. 240 min battery operation kept up) stop the battery

test error-free, whereas the under-run of the minimum discharge voltage “MinDischarge vt” (26.3)

*7.1

stops the test with error.

If the battery test has been stopped with error, the battery error event can be reset by restarting the

unit, d

eleting using the control keys of a remote display or by a successfully completed battery test.

23.1

23.2

23.3

23.4

26.1

26.2

26.3

26.4

26.5

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 99 100

Comentarios a estos manuales

Sin comentarios

Eltek Valere UNV-F 2.5 Manual de usuario Pagina 68

Comentarios a estos manuales

Relacionado con productos y manuales para Adaptadores E Inversores De Energía Eltek Valere UNV-F 2.5